86-0773-2666198
No. 3, Industry Park, Dingjiang Town, Guilin, Guangxi, China (Mainland)
single dead-end clamp/cable fittings is competitive
span 50~200m
simple structure
convenient installation
ISO9001:2000
single dead-end clamp/cable fittings
Material: aluminum clad steel rod or galvanizition steel rod.
Usage | 1, for OPGW cable 2, on angle, tension and terminal tower within 50-200 miles span. 3, can not only used for overhead cable but also used for anchor fixing and clamp pulling in construction of cable. |
Feature | 1, simple structure 2, convenient installation. |
Composition | preformed rods , suspension link. |
Partial model parameters:
model | ** Length of rods (mm) |
Holding strength (KN) |
Failing load (KN) |
Span
(m) |
Estimate weight (kg) |
*SHND-OXXXX/020 | 900 | 20 |
≥40 | 100 | 2.0 |
SHND-OXXXX/030 | 1100 | 25 | 150 | 2.6 | |
SHND-OXXXX/040 | 1200 | 30 | 200 | 3.0 |
Notes:In the model column,SH represents these are Shihui corporation’s products, N represents
tension clamp, D represents single layer. O represents these products are for OPGW optical cable.
** The length of preformed rods are subject to the practical length of commodities
Explanation:The above diagram only lists partial model parameters. Customers should define
optical cable’s diameter and the RTS first before ordering the products and they should also define
the model of optical cable in the correspondent way. Using range of products model parameters is
allowed a certain tolerance range on the condition that the products satisfy the holding strength
requirement. According to nation’s related technology formulate. OPGW single tension clamp’s holding
strength should reach95%RTS in general.
E.g.1:one cable’s diameter is 13.60mm, the RTS is 62.5KN, required holding strength by designing
is 95% RTS, so the method to choose the armour model is:
13.60×102=1360
62.5×95% =59.375≈60(KN)
So single tension clamp’s model is SHND-O1360/060.
